|
|
Determining the possibilities of increasing binding potencial of fly ash for the usage in cement composites
Jančaříková, Denisa ; Ďurica,, Tibor (referee) ; Klečka,, Tomáš (referee) ; Kulísek, Karel (referee) ; Hela, Rudolf (advisor)
The deliberate use of fly ash in the production of concrete has been used for decades, but recent trends tend to maximise its utility properties. These are different types of activations from chemical through thermal to mechanical. An alkaline agent is added to chemical activation which, by etching the glass structure of the ash grain, promotes its reactivity. Mechanical activation is mainly focused on granulometry and particle size distribution curve. In this thesis three mechanical activation methods are compared: separation the ash into fractions by grain size, mixing these fractions to achieve the ideal particle size distribution curve and grinding. Four types of ash were collected from the Tušimice power plant – ash from individual electrostatic separators (I, II and III) and SESYP ash which represents the total volume of production. Ash from individual separators differ not only in the particle size but also in the chemical composition and reactivity. Better properties generally have smaller ash particles. This is used by mechanical activation by sorting. When mixing the individual ash fractions, the aim is to achieve an optimal grading curve of either the ash itself or the fine particle set in the concrete. In this work, ash is only used to calculate the mixing ratio and the grading curve according to Funk was selected as optimal. The last compared option of activation was grinding ash. Grinding was carried out in an industrial mill for 15, 30, 45, 60 and 75 minutes. The efficiency of the modified ash was monitored for cement paste in terms of rheology and for concrete in terms of consistency, strength and durability. Based on the results we can say that mechanical activation by sorting is suitable for special purposes, but it’s necessary to realise that coarser ash fractions remain unused. When mixing the fractions to ensure matrix density, the efficiency was shown mainly on the durability characteristics. Grinding cause positive effect.
|
|
| |
|
|
Influence of environmental conditions on the modulus of elasticity of concrete
Peřina, Tomáš ; Novosad, Petr (referee) ; Křížová, Klára (advisor)
Increasingly, the modulus of elasticity of concrete is at the forefront of interest. In the past, it has been neglected to some reason and not taken into due consideration. The theoretical part of the bachelor thesis is to study of factors influencing the static modulus of elasticity in compression. The practical part is focused on monitoring the modulus of elasticity of concrete, based on the different type of the environment stored test specimens. Concrete will be stored outdoor in the water and in the laboratory environment conditions. Designed concrete mixes will be primarily different with the used of type of admixtures but also with type of cement. The result values will be compared on the dependence of environmental conditions of the test specimens.
|
|
|
Study of the development, trends and innovations in shotcrete technology
Záruba, Jiří ; Hela, Vlastimil (referee) ; Hubáček, Adam (advisor)
The Bachelor thesis is focused on the study of development, trends and innovations in shotcrete technology. The main target of this thesis is to summarize new procedures in shotcrete technology. Secondary targets include a description of basic properties of sprayed concrete, introducing new trends and technology in recent years. The next sub-goal is to propose experiment that will try new ways of testing shotcrete. Based on these secondary targets is possible to evaluate the current situation in shotcrete technology and fulfil the main objective of this thesis.
|
|
|
Building survey and evaluating the state construction
Suchánková, Zuzana ; Anton, Ondřej (referee) ; Heřmánková, Věra (advisor)
The diploma thesis is focused on study of diagnostic methods used for reinforced concrete structure with a practical example of a survey on the subject of the original memorial Bata in Zlin, today's House of Art. The theoretical part of the thesis describes the general methodology of the survey with the distribution methods for testing materials and structures, and displays the evaluation according to ČSN ISO 1382 Also deals with the required properties and used by diagnostic methods for concrete and steel. In the practical part of the surveyed, which is supposed to show the methodology of the survey to the evaluation process involving the setting apart of strength and classification of concrete and chemical analysis, which should show whether the concrete is not based on aluminous cement.
|
|
| |
|
|
Determining the possibilities of increasing binding potencial of fly ash for the usage in cement composites
Jančaříková, Denisa ; Ďurica,, Tibor (referee) ; Klečka,, Tomáš (referee) ; Kulísek, Karel (referee) ; Hela, Rudolf (advisor)
The deliberate use of fly ash in the production of concrete has been used for decades, but recent trends tend to maximise its utility properties. These are different types of activations from chemical through thermal to mechanical. An alkaline agent is added to chemical activation which, by etching the glass structure of the ash grain, promotes its reactivity. Mechanical activation is mainly focused on granulometry and particle size distribution curve. In this thesis three mechanical activation methods are compared: separation the ash into fractions by grain size, mixing these fractions to achieve the ideal particle size distribution curve and grinding. Four types of ash were collected from the Tušimice power plant – ash from individual electrostatic separators (I, II and III) and SESYP ash which represents the total volume of production. Ash from individual separators differ not only in the particle size but also in the chemical composition and reactivity. Better properties generally have smaller ash particles. This is used by mechanical activation by sorting. When mixing the individual ash fractions, the aim is to achieve an optimal grading curve of either the ash itself or the fine particle set in the concrete. In this work, ash is only used to calculate the mixing ratio and the grading curve according to Funk was selected as optimal. The last compared option of activation was grinding ash. Grinding was carried out in an industrial mill for 15, 30, 45, 60 and 75 minutes. The efficiency of the modified ash was monitored for cement paste in terms of rheology and for concrete in terms of consistency, strength and durability. Based on the results we can say that mechanical activation by sorting is suitable for special purposes, but it’s necessary to realise that coarser ash fractions remain unused. When mixing the fractions to ensure matrix density, the efficiency was shown mainly on the durability characteristics. Grinding cause positive effect.
|
|
|
Influence of environmental conditions on the modulus of elasticity of concrete
Peřina, Tomáš ; Novosad, Petr (referee) ; Křížová, Klára (advisor)
Increasingly, the modulus of elasticity of concrete is at the forefront of interest. In the past, it has been neglected to some reason and not taken into due consideration. The theoretical part of the bachelor thesis is to study of factors influencing the static modulus of elasticity in compression. The practical part is focused on monitoring the modulus of elasticity of concrete, based on the different type of the environment stored test specimens. Concrete will be stored outdoor in the water and in the laboratory environment conditions. Designed concrete mixes will be primarily different with the used of type of admixtures but also with type of cement. The result values will be compared on the dependence of environmental conditions of the test specimens.
|
|
|
Building survey and evaluating the state construction
Suchánková, Zuzana ; Anton, Ondřej (referee) ; Heřmánková, Věra (advisor)
The diploma thesis is focused on study of diagnostic methods used for reinforced concrete structure with a practical example of a survey on the subject of the original memorial Bata in Zlin, today's House of Art. The theoretical part of the thesis describes the general methodology of the survey with the distribution methods for testing materials and structures, and displays the evaluation according to ČSN ISO 1382 Also deals with the required properties and used by diagnostic methods for concrete and steel. In the practical part of the surveyed, which is supposed to show the methodology of the survey to the evaluation process involving the setting apart of strength and classification of concrete and chemical analysis, which should show whether the concrete is not based on aluminous cement.
|
|
| |
guest ::
